- Wall-To-Wall Flooring
Wall-to-wall fall protection flooring for patient rooms
It looks like ordinary flooring. It walks like ordinary flooring. At the moment of a fall, it does something ordinary flooring can’t. Planned, measured and installed for hospital flooring renovations, new construction and whole-room safety upgrades.
- Why Built-In Wins
A mat protects a spot. This protects the whole room.
- Wall-to-wall fracture protection across the entire walking and care area
- Door threshold trips minimized with ramped transition solutions
- Antiviral and antibacterial wear layer protects low-immunity patients
- Quiet installations, no loud power tools needed
- Installs over existing tile, wood or concrete in many spaces
- Skips the labor cost and noise of tearing out existing floors
- Subfloor imperfections don't telegraph through to the vinyl surface
- Cognitive-friendly styles across wood, stone, textile and terrazzo looks
- Weldable vinyl seams meet hospital infection-control compliance
- Wear layer meets ASTM F410, cleanability meets ASTM F925
- Bathrooms First
Bathrooms are ground zero
Wet surfaces, confined spaces and transfer movements make bathrooms the most dangerous rooms in any care facility. No staffing level eliminates that combination. The floor can change what happens when it fails.
- Bathroom fracture rates run higher than bedside rates, 5.0% in our facility model, because the surfaces are unyielding
- Permanent flooring absorbs the impact across the whole room, not one spot
- Fully sealed, heat-welded seams stay impermeable to fluids
- Rehab & Therapy Rooms
Firm enough for therapy, soft enough for the miss
Gait training, transfers and therapy equipment need a floor that never gives underfoot. Wall-to-wall coverage keeps sessions stable and puts impact protection under the exact moments when a step fails.
- Stable for walkers, wheelchairs, parallel bars and transfer equipment
- Room-wide coverage with no mat edges in the walking path
- From First Call To Protected Room
A planned installation, not a guess
Step 1
Your facility, your high-risk areas, your goals.
Step 2
An on-site look at the actual spaces you want to protect.
Step 3
Precise measurement, then the right configuration for each space.
Step 4
Professional installation, then cleaning and care guidance for the life of the floor.
- Common Questions
Wall-to-wall safety flooring questions
Does fall protection flooring feel soft to walk on?
No. It walks like standard vinyl flooring and stays firm under feet, walkers and wheelchairs. It only compresses under the sudden force of a fall.
Do you have to tear out the existing floor?
In many spaces, no. Magic Shields installs over existing tile, wood or concrete, which skips demolition costs and noise.
How is it tested?
The impact-absorbing core is tested for force reduction per ASTM F2569. The flooring also meets ASTM E648 Class 1 and E662 for fire and smoke, ASTM F410 for wear layer and ASTM F925 for cleanability.
What does it cost?
Pricing depends on room size, layout and subfloor. After a site review, we give you a per-room quote.
- For Architects And Design Teams
Specify protection before the space is built
Planning a hospital, senior care, rehab or memory care project? Our technical resource includes ASTM testing references, impact-reduction data, installation considerations, surface options and planning details for new construction and occupied-space upgrades.
